News

NEWS CENTER

How to do a good job in the daily maintenance of five axis walking machine

Release time:

2020-06-06

At present, more and more factories and workshops begin to use five-axis walking machines, which helps to improve the processing and production speed of parts and greatly improve the quality. During the operation of the equipment, we need to carry out back maintenance to better extend the service life of the walking machine. If there is no proper operation and maintenance, it may lead to a series of problems.

1. keep the environment clean and tidy

When using a five-axis walking machine, the environment is required. It must be clean and dust-free. Air should not be too humid or too dry, especially corrosive gases. Otherwise, if used for a long time, the accessories of the equipment will be corroded. If there are too many impurities, there will be some malfunctions when using the machine. In order to prevent machine damage and extend the trouble-free running time of the equipment, we all need to keep the workshop environment clean and tidy, which has a significant effect on extending the use time of the equipment.

2. keep the heart clean

It is necessary for workers to keep the machine clean at all times. This is a very important part of their work. Enterprises need to formulate relevant rules, stipulating that the main parts of the machine need to be cleaned every shift. These components include workbenches, operation panels, and the like. In particular, the blade holder plate requires special maintenance. It needs to be wiped clean with soft cotton yarn, and then coated with lubricating oil, which can effectively prevent the corrosion of the tool holder plate.

In addition, every week, all equipment needs cleaning and care, such as dust nets, filters, chips, etc. Some other parts need to refer to and follow the instructions.

3. periodic inspection

1. All parts of the five-axis walking machine should be checked regularly, including the hydraulic system, lubrication system, cooling system and other parts.

2. The buttons and switches on the machine also need regular inspection and maintenance to find problems in the shortest time and eliminate hidden dangers.

3. It is necessary to regularly check the wear and tightness of the belt, whether the reduction gear lubricating oil is clean and free of impurities, and the remaining parts, including contactors, relays, etc. Need to check.

4. The focus of the inspection is the cooling and ventilation device of the machine. If there is no regular inspection, the abnormal operation of the equipment is easy to occur, which will cause a series of applause, such as the deterioration of the working environment of electrical components.

4. put an end to machine with fault operation

If the various parts of the running machine fail, they cannot continue to operate, especially the mechanical parts. At this time, they must stop working immediately, analyze the cause of the failure, and repair it after understanding the cause before they can continue to run. If the machine fails but does not stop working, it will cause serious damage to the equipment. The above is about some maintenance work of the five-axis walking machine. Today's standard walking machines have the advantage of shortening the product manufacturing process chain, which can improve production and processing efficiency. At the same time, it can also reduce the operating time of workers and produce parts with higher precision.

Key words:

Introduction of Planetary Gear

The correct use and installation method of reducer

Introduction of Planetary Gear

The correct use and installation method of reducer